Frustrated with Doors Sticking. Seeking advice. Issue in Comments
I have three recently installed door jambs with pre-hung doors included. The install was fine; everything was flush and plumb, however; with weather changing, the doors are now sticking (all at the top, near where the door closes) and do not close fully without forcing, and even once closed, they are not flush or level. I've tried pulling the hinge pin to adjust hinge angle but even with a tool the pin will not release. I've tried removing the complete hinge to adjust the hang and I've had no success. I've read a dozen online articles and watched several videos on solutions. None of these methods are working. Any advice on how to get the door flush and closing properly again, would be helpful. submitted by /u/mostly_sarcastic [link] [comments]
I have three recently installed door jambs with pre-hung doors included. The install was fine; everything was flush and plumb, however; with weather changing, the doors are now sticking (all at the top, near where the door closes) and do not close fully without forcing, and even once closed, they are not flush or level.
I've tried pulling the hinge pin to adjust hinge angle but even with a tool the pin will not release. I've tried removing the complete hinge to adjust the hang and I've had no success. I've read a dozen online articles and watched several videos on solutions. None of these methods are working. Any advice on how to get the door flush and closing properly again, would be helpful.
[link] [comments]
