![First pictures of RED V-RAPTOR [X] and Komodo [X] cinema cameras with Nikon Z-mount leaked online](https://nikonrumors.com/wp-content/uploads/2025/02/RED-V-RAPTOR-X-Z-Mount-and-Komodo-X-Z-mount.webp)
![RED V-RAPTOR [X] video camera with Nikon Z-mount mockup](https://nikonrumors.com/wp-content/uploads/2025/02/RED-V-RAPTOR-X-video-camera-with-Nikon-Z-mount-mockup.jpg)
.png?width=1920&height=1920&fit=bounds&quality=80&format=jpg&auto=webp#)
.jpg)
Dishwasher not draining - not the filter! What could it be?
Thank you in advance for your advice! Our dishwasher randomly stopped draining the water after a cycle. Dishwasher has been working fine for years otherwise. The pump DOES work - if I start another cycle for a sec and then cancel it immediately, the cancel cycle runs and the pump runs and empties some of the water. Doing this 3x drains the full tub after a regular wash cycle When I tricked the pump into running via cancelling a cycle, I can see the water moving in the drain tube under the sink and I can see it draining into the disposal so that would indicate to me that it's NOT a blockage from either a kink in the pipe or filter being clogged. Just to confirm, I also ran a rinse-only cycle with nothing in there and the filters removed. Water still did not drain so I'm pretty confident it's not a clogged filter or kink/blockage in the pipe. It seems like whatever triggers the pump to operate at the end of a cycle isn't triggering, and/or some sort of switch that tells the pump to keep pumping because water is still in there, that switch is broken. Are either of those things a possibility? What part would need replacement? Any other ideas for things to try? Thank you! All the other advice on the internet/this sub just points to a clogged filter and I'm pretty confident that isn't what's going on here! submitted by /u/Draymond_Purple [link] [comments]
Thank you in advance for your advice!
Our dishwasher randomly stopped draining the water after a cycle.
Dishwasher has been working fine for years otherwise.
The pump DOES work - if I start another cycle for a sec and then cancel it immediately, the cancel cycle runs and the pump runs and empties some of the water. Doing this 3x drains the full tub after a regular wash cycle
When I tricked the pump into running via cancelling a cycle, I can see the water moving in the drain tube under the sink and I can see it draining into the disposal so that would indicate to me that it's NOT a blockage from either a kink in the pipe or filter being clogged.
Just to confirm, I also ran a rinse-only cycle with nothing in there and the filters removed. Water still did not drain so I'm pretty confident it's not a clogged filter or kink/blockage in the pipe.
It seems like whatever triggers the pump to operate at the end of a cycle isn't triggering, and/or some sort of switch that tells the pump to keep pumping because water is still in there, that switch is broken.
Are either of those things a possibility? What part would need replacement? Any other ideas for things to try?
Thank you! All the other advice on the internet/this sub just points to a clogged filter and I'm pretty confident that isn't what's going on here!
[link] [comments]
