Advice for door not fully sealing
I have fairly new french doors which are slightly warped or 5mm off alignment. They're sealed with a good draught seal, but the top of the door is just 5mm from forming a perfect seal. I'm thinking of installing a plate magnet (as shown in pics) but that would involve cutting a portion of the seal. Any advice welcome. submitted by /u/ApprehensiveGene2579 [link] [comments]
I have fairly new french doors which are slightly warped or 5mm off alignment. They're sealed with a good draught seal, but the top of the door is just 5mm from forming a perfect seal. I'm thinking of installing a plate magnet (as shown in pics) but that would involve cutting a portion of the seal.
Any advice welcome.
[link] [comments]
