![Anime Rangers X Tier List [UPDATE 1] – All Legendary, Mythic, Secret, and Ranger Units Ranked](https://www.destructoid.com/wp-content/uploads/2025/04/ultimate-anime-rangers-units-tier-list.webp?quality=75)
Breaking cavity fixing, what am I doing wrong?
https://preview.redd.it/h5wtyvpwwy1f1.png?width=448&format=png&auto=webp&s=a31d6e2bb8c1132bd60718e2184a7e2786a9ebaa I have these fixer for a gypsum wall. I drill a hole, then try to drill those fixers into the wall. But, more often than note they just break/the thread is flattened. Am I drilling them with too much force into the wall or are the holes I drill too small? The drill bit is a 0.5mm, the cavity fixing I'm using is made for 4.5mm screws. Should I do 0.6mm holes? submitted by /u/rebexus1 [link] [comments]
| | I have these fixer for a gypsum wall. I drill a hole, then try to drill those fixers into the wall. But, more often than note they just break/the thread is flattened. Am I drilling them with too much force into the wall or are the holes I drill too small? The drill bit is a 0.5mm, the cavity fixing I'm using is made for 4.5mm screws. Should I do 0.6mm holes? [link] [comments] |
